H685mp+ HSPA+ Industrial RouterHSPA+ network is upgraded from hsdpa/hsupa network, with 21mbps maximum comparing to HSDPA network Newly published 3G router HSUPA Router H800p works under 3G HSPA+/HSPA/HSUPA/HSDPA network and back compatible to EDGE/GPRS/GSM network. Durable, flexible, and user-friendly feature is widely used for different kinds of high data transmission applications.

 

H800p is with four RJ45 lan port + 1 WAN RJ45 port + Serial port + WiFi optional + GPS optional. Serial port supports RS232/RS485/TTL interface.

 

The H800p 3g cellular router is easy to install reducing the reliance on the end customer and enables direct access to your remote LAN devices for control and monitoring purposes.

It enables companies to remotely access equipment at mobile, remote networks and isolated sites.

 

The Industrial Router offers wireless network routing optimised for machines, small networks and specialised Fixed IP services now available from wireless operators. It offers low cost router operation through Dial-out, Dial-in and Always Connected modes of operation.

 

E-Lins’ 3g industrial routers are widely used in more than 50 countries and regions, and more than twenty industrial fields, such as power control, water schedule, traffic, oil field, weather forecast, environmental protection, street lamp control, post, bank and many other areas.

 

3G Wireless Router for Industrial Application

  • 1) Remote Data Monitor and Control;

  • 2) CCTV, security surveillance;
  • 3) Water, gas and oil flow metering and schedule;
  • 4) AMR (automatic meter reading);
  • 5) Power station monitoring and control;
  • 6) Remote POS (point of sale) terminals, ATM,
  • 7) Traffic signals monitor and control, Traffic info guidance;
  • 8) Oil field, weather forecast, environmental protection, street lamp monitoring and control
  • 9) Early Warning of Mountain Torrent;
  • 10) Fleet management;
  • 11) Power distribution network supervision;
  • 12) Central heating system supervision;
  • 13) Weather station data transmission;
  • 14) Hydrologic data acquisition;
  • 15) Vending machine;
  • 16) Telemetry, SCADA;
  • 17) Vehicle logistics and diagnostics controlling;
  • 18) Parking meter and Taxi Monitor;

19) Telecom equipment supervision (Mobile base station, microwave or optical relay station)

>>| Hot Spot for H800 series router

  1. 1 WAN RJ45 port + 4 LAN RJ45 port
  2. VPN (PPTP, L2TP, IPSec)
  3. standard SMA antenna can be replaced with high gain type
  4. 1 RS232 to RJ45 port for DTU feature (Serial to Cellular Gateway feature)
  5. WiFi 802.11b/g/n
  6. RJ45 WAN (xDSL) and Cellular backup each other (Route Fail Over Feature)
  7. Two H800 can backup each other if one H800 line failed. (to be Dual sim dual mode feature)
  8. Always online, Reboot if the connection is failed.
  9. Support two LAN IP address (VLAN feature)
  10. SMS/Voice call to control router to be online and offline
  11. GPS optional
  •  

>>| Typical Topology

H800 series typical topology 1

H800 series typical topology 2

  •  

How to get H800p HSPA+ 3G Router to work?

1. Get a 3g sim card with data business, enough balance available;

2. 3G signal is good enough because good signal is required for dialup and good internet speed and bandwidth;

3. One PC or Laptop with RJ45 port to config the H800. If H800 is with wifi option feature, you can also config it via WiFi.

 

Notes:

H800p is HSPA+ version which is working under HSPA+/HSPA//HSUPA/HSDPA/EDGE/GPRS/GSM networks.

 

H800 series Cellular router versions:

H800d -- HSDPA version

H800u -- HSUPA version

H800p -- HSPA/HSPA+ version

H800ev -CDMA2000 EVDO version

For details, please refer to the datasheet.

Please confirm what you need before order.

 

Download - H800p Router

H800p HSPA+ Industrial Router

Datasheet

 

H800 series is multi-port router, for single port mini router, please check at

H685 Series Router

H685m Series Router

 

 

For non-industrial Cellular Mobile Router, please refer to

non-industrial classed cellular router

 

Catalog - Router Modem AP

 

Industrial Class Series

 

SOHO Class Series

Appearance - H800 Industrial Router
Industrial 4G LTE Cellular Router with RJ45 port

Network
GSM/GPRS/EDGE/TD-SCDMA/WCDMA/HSDPA/HSUPA/HSPA/HSPA+
GSM/GPRS/EDGE: 850/900/1800/1900Mhz
UMTS/WCDMA/HSDPA/HSUPA/HSPA/HSPA+: 850/1900/2100Mhz or 850/900/1900/2100Mhz

Data Speed:
Speed:
HSDPA: 7.2Mbps downlink, 384kbps uplink
HSUPA: 7.2Mbps/14.4Mbps downlink, 5.76mbps uplink
HSPA/HSPA+: 21Mbps downlink, 5.76mbps uplink

Function
Connect to Internet, data transmission, network always online, auto redail up
 
4 LAN RJ45 port + 1 WAN RJ45 Port, Serial port optiopnal(RS232/RS485/TTL), WiFi optional, GPS optional;
Support RS232/RS485/TTL to Cellular Data converter (optional feature);
Support User-friendly Web GUI;
Firmware Upgradeable;
Traffic & Event Log;
Auto-Reconnect;
Firewall - NAT, ALG modules, DMZ, DDNS
VPN and Tunneling (PPTP,L2TP,IPsec) 
 
Network Services include DHCP, Time, DNS
Remote Management with SNMP
Zero-configuration UPnP support
Web based SMS client
R&TTE and GCF certified
Support RS232/RS485/TTL Port
GPS Feature
GPS supported optional
Power
Supply voltage range 7 - 30VDC(9V,12v suggest)
Low power waste
Firmware
Support Firmware update for better quality
Dimension
Dimension: 158 x 106 x 27mm(without antenna)
Weight:
470g (not including the antenna)
Shell
Steel shell: good electromagnetic shield and , heat radiate performance
Electromagnetic Compatible
Electrostatic Discharge (ESD): 3 class
Radiated, radio-frequency, electromagnetic field immunity test: 3 class
Environment
Storage Temperature: -40 ~ 85°C
Working Temperature: -30 ~ 75°C
Humidity: 95% (non-condensing)
Product Network Band Power Interface VPN Wi-Fi GPS
H800d HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V~30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800u HSUPA/HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V~30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800p HSPA+/HSPA/HSUPA/HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V~30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800ev EVDO/CDMA1x 800/1900, or 450Mhz DC 7V~30V LAN*4, WAN*1,Serial Yes Optional Optional