H800 4G LTE Router with WiFi

 

 

 

 

 

 

 

In telecommunications, 4G is the fourth generation of cellular wireless standards. It is a successor to the 3G and 2G families of standards. In 2009, the ITU-R organization specified the IMT-Advanced (International Mobile Telecommunications Advanced) requirements for 4G standards, setting peak speed requirements for 4G service at 100 Mbit/s for high mobility communication (such as from trains and cars) and 1 Gbit/s for low mobility communication (such as pedestrians and stationary users).

 

H800t is a 4g lte router with four RJ45 lan port + 1 WAN RJ45 port + Serial port + WiFi optional + GPS optional. Serial port supports RS232/RS485/TTL interface.

 

The H800t 4g router is easy to install reducing the reliance on the end customer and enables direct access to your remote LAN devices for control and monitoring purposes.

It enables companies to remotely access equipment at mobile, remote networks and isolated sites.

 

The Industrial 4G LTE Router offers wireless network routing optimised for machines, small networks and specialised Fixed IP services now available from wireless operators. It offers low cost router operation through Dial-out, Dial-in and Always Connected modes of operation.

 

 

 

>>| Hot Spot for H800 series router

  1. 1 WAN RJ45 port + 4 LAN RJ45 port
  2. VPN (PPTP, L2TP, IPSec)
  3. standard SMA antenna can be replaced with high gain type
  4. 1 RS232 to RJ45 port for DTU feature (Serial to Cellular Gateway feature)
  5. WiFi 802.11b/g/n
  6. RJ45 WAN (xDSL) and Cellular backup each other (Route Fail Over Feature)
  7. Two H800 can backup each other if one H800 line failed. (to be Dual sim dual mode feature)
  8. Always online, Reboot if the connection is failed.
  9. Support two LAN IP address (VLAN feature)
  10. SMS/Voice call to control router to be online and offline
  11. GPS optional

  •  

>>| Typical Topology

H800 series typical topology 1

H800 series typical topology 2

  •  

How to get H800t 4G LTE Router to work?

1. Get a 4g sim card with data business, enough balance available;

2. 4G signal is good enough because good signal is required for dialup and good internet speed and bandwidth;

3. One PC or Laptop with RJ45 port to config the H800. If H800 is with wifi option feature, you can also config it via WiFi.

 

Notes:

H800t is 4G LTE version which is working under 4G LTE network and back compatible to HSPA+/HSPA//HSUPA/HSDPA/EDGE/GPRS/GSM networks.

 

H800 series Cellular router versions:

H800d -- 3G HSDPA version

H800u -- 3G HSUPA version

H800p -- 3G HSPA version

H800p+ --4G HSPA+ version

H800t -- 4G LTE version

H800ev -CDMA2000 EVDO version

For details, please refer to the datasheet.

Please confirm what you need before order.

 
Download - H800t Router

H800t Industrial LTE Router

Datasheet

 

H800 series is multi-port router, for single port mini router, please check at

H685 Series Router

H685m Series Router

 

 

For non-industrial Cellular Mobile Router, please refer to

non-industrial classed cellular router

 
Appearance - H800 4G LTE Router
Industrial 4G LTE Cellular Router with RJ45 port
Network
4G LTE & GSM/GPRS/EDGE/TD-SCDMA/WCDMA/HSDPA/HSUPA/HSPA/HSPA+
4G: 700/2100MHz, 1800/2600MHz
GSM/GPRS/EDGE:850/900/1800/1900Mhz
UMTS/WCDMA/HSDPA/HSUPA/HSPA/HSPA+: 850/1900/2100Mhz or 850/900/1900/2100Mhz

Data Speed:
Speed:
HSDPA: 7.2Mbps downlink, 384kbps uplink
HSUPA: 7.2Mbps downlink, 5.76mbps uplink
HSPA: 21Mbps downlink, 5.76mbps uplink
HSPA+: 21/42Mbps downlink, 5.76mbps uplink
4G LTE: 100Mbps

Function
Connect to Internet, data transmission, network always online, auto redail up
 
4 LAN RJ45 port + 1 WAN RJ45 Port, Serial port optiopnal(RS232/RS485/TTL), WiFi optional, GPS optional;
Support RS232/RS485/TTL to Cellular Data converter (optional feature);
Support User-friendly Web GUI;
Firmware Upgradeable;
Traffic & Event Log;
Auto-Reconnect;
Firewall - NAT, ALG modules, DMZ, DDNS
VPN and Tunneling (PPTP,L2TP,IPsec) 
 
Network Services include DHCP, Time, DNS
Remote Management with SNMP
Zero-configuration UPnP support
Web based SMS client
R&TTE and GCF certified
Support RS232/RS485/TTL Port
GPS Feature
GPS supported optional
Power
Supply voltage range 7 - 30VDC(9V,12v suggest)
Low power waste
Firmware
Support Firmware update for better quality
Dimension
Dimension: 158 x 106 x 27mm(without antenna)
Weight:
470g (not including the antenna)
Shell
Steel shell: good electromagnetic shield and , heat radiate performance
Electromagnetic Compatible
Electrostatic Discharge (ESD): 3 class
Radiated, radio-frequency, electromagnetic field immunity test: 3 class
Environment
Storage Temperature: -40 ~ 85°C
Working Temperature: -30 ~ 75°C
Humidity: 95% (non-condensing)
Product Network Band Power Interface VPN Wi-Fi GPS
H800d HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V~30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800u HSUPA/HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V～30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800p HSPA/HSUPA/HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V～30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800p+ HSPA+/HSPA/HSUPA/HSDPA/EDGE/GPRS/GSM 850/900/1800/1900/2100Mhz DC 7V～30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800t LTE & HSPA+/HSPA/HSUPA/HSDPA/EDGE/GPRS/GSM 700/2100MHz, 1800/2600MHz & 3G 2G band DC 7V～30V LAN*4, WAN*1,Serial Yes Optional Optional  
H800ev EVDO/CDMA1x 800/1900, or 450Mhz DC 7V～30V LAN*4, WAN*1,Serial Yes Optional Optional