Cell Router - 3.5G Router - 3.75G Router - HSPA Router - HSPA+ Router

Ethernet is migrating from traditional IT equipment and being adopted as a standard interface for many types of machines, however challenges arise at customers sites where the LAN infrastructure is outside your control.

The Cell Router creating a standalone network, where access to attached LAN-based devices is gained over wireless network for control and monitoring purposes.

The 3.5G Router is easy to installreducing the reliance on the end customer and enables direct access to your remote LAN devices for control and monitoring purposes.

It enables companies to remotely access equipment at mobile, remote networks and isolated sites.

The 3.75G Router offers wireless network routing optimised for machines, small networks and specialised Fixed IP services now available from wireless operators. It offers low cost router operation through Dial-out, Dial-in and Always Connected modes of operation.

The HSUPA Router can be easily updated to HSPA router and HSPA+ router, which provides 14.4mbps or 28mbps or higher.

The 3G Cell Router is designed for establish a Wi-Fi wireless network and share a cellular broad band Internet connection. The 3G Cellular Router enables users to quickly create a secure Wi-Fi (802.11 b/g/n) network and provide access to the Internet using a cellular network. By connect to HSUPA network; an Internet connection can be accessed and shared virtually anywhere within a wireless broadband network.

E-Lins’ mobile 3G Router products are widely used in more than 50 countries and regions, and more than twenty industrial fields, such as power control, water schedule, traffic, oil field, weather forecast, environmental protection, street lamp control, post, bank and many other areas.

3.5G Router and 3.75G Router for Industrial Application

• 1) Remote Data Monitor and Control;

• 2) CCTV, security surveillance;
• 3) Water, gas and oil flow metering and schedule;
• 4) AMR (automatic meter reading);
• 5) Power station monitoring and control;
• 6) Remote POS (point of sale) terminals, ATM,
• 7) Traffic signals monitor and control, Traffic info guidance;
• 8) Oil field, weather forecast, environmental protection, street lamp monitoring and control
• 9) Early Warning of Mountain Torrent;
• 10) Fleet management;
• 11) Power distribution network supervision;
• 12) Central heating system supervision;
• 13) Weather station data transmission;
• 14) Hydrologic data acquisition;
• 15) Vending machine;
• 16) Telemetry, SCADA;
• 17) Vehicle logistics and diagnostics controlling;
• 18) Parking meter and Taxi Monitor;

19) Telecom equipment supervision (Mobile base station, microwave or optical relay station)

>>| Hot Spot for H685 series router
Broadband M2M communications
SIM failover/standby APN
3G failover for fixed line broadband connections
Support two LAN IP address.
Rapid service deployment applications
VPN (PPTP,L2TP,IPSec)
WiFi optional
GPS optional
I/O port terminal blocks for DTU feature (RS232/RS485 to Cellular Gateway)
SMS/Voice call to control router to be online and offline

H685 series typical topology

How to get H685p HSPA+ 3G Router to work?

1. Get a 3g sim card with data business, enough balance available;

2. 3G signal is good enough because good signal is required for dialup and good internet speed and bandwidth;

3. One PC or Laptop with RJ45 port to config the H685. If H685 is with wifi option feature, you can also config it via WiFi.

Notes:

H685u is HSUPA version which is working under HSUPA/HSDPA/EDGE/GPRS/GSM networks.

H685 series Cellular router versions:

H685g -- GPRS version

H685e -- EDGE version

H685d -- HSDPA version

H685u -- HSUPA version

H685p -- HSPA+ version

H685mc -- CDMA1x version

H685mev -CDMA2000 EVDO version

For details, please refer to the datasheet.

Please confirm what you need before order.